Product Finder for All Products

Product Info for UNITHANE IC-806 SF

Downloads

Unithane IC-806 SF is a solvent free, uniquely soft, low VOC, medium gloss, APEO free, waterbased polyurethane dispersion; requiring soft feel, flexibility and automotive grade properties. Unithane IC-806 SF also displays low tack when used as heat seal adhesive. Specifically designed for use in a formulated coating for graphic arts, metal, paint, textiles and selected plastics.

Industrial Applications:

This product is recommended for: Automotive Interiors – Non-Leather, Paint and Coating Resins, Graphic Arts, Flexible Substrates, Adhesives

Product Characteristics:

Product Class	Solids %	pH	Viscosity @25ºC	Gloss	VOC g/L	Tensile (D-882)	Elongation (%)	Modulus 100% (psi)	Sward Hardness
	34 – 36	8.0 – 10.0	10 – 500 cps	70-100	13-14	4510	919%	547 psi

Full product details can be found in this section:

GENERAL INFORMATION

Special Features: Solvent Free (SF), Low VOC (<100 g/L)
Application Types – Industrial Coatings: Interior, Exterior, Automotive, Aircraft, Synthetic Leather, Paint, Graphic Arts, OPV, Paper, Textiles, Plastics – Flexible, Plastics – Rigid, Adhesive/Primer

TYPICAL SPECIFICATIONS

Total Solids %: 34 – 36
pH: 8.0 – 10.0
Viscosity @ 25⁰ C: 10 – 500 cps
VOC (Grams/Liter): 13-14
VOC (% of total weight): 1.0-1.5
Specific Gravity: 1.01-1.04
Appearance: Semi-translucent
Gloss (60): 70-100
Freeze/Thaw Cycles (D-2243): 3
Shelf Life: Maximum 12 months
Harmonize Tariff Number: 3909.50.6000

TYPICAL FILM PROPERTIES

Tensile (D-882): 4510
Tensile at 100% Elongation: 547 psi
Elongation (D-882): 919%
Cold Crank (ISO 17233): below -30°C
Softening Point: 155°C
Pencil Hardness (D-3363): HB
UV Resistance (D-4587): No damage (1000 hours at 340nm)
Impact Resistance (D-2794): No damage at 160 psi Direct or Riverse
Tabor Abrasion (D-4060): 40 mg loss (CS-10, 1000g, 1000 cycles)
Mandrel Bend (D-522): Pass 1/8, 1/4, 3/8, 1/2, 5/8, 3/4, 1
Dry Time (D-5895): 42 minutes
Hydrolysis Resistance (200 hours, 70ºC, 95% RH): Retained 90% of Tensile Properties

CHEMICAL RESISTANCE TESTING (D-1308)

note: 5= no damage, films dried for 15 minutes at 80ºC, then equalized at room temp for 7 days.
Water: 5
Acetic Acid: 5
Ammonia: 5
Methyl Ethyl Ketone: 1
2-Propanol: 1
Toluene: 4
Gasoline: 5

VARIOUS SUBSTRATE CROSS CUT ADHESION (D-3359)

Cold Roll Steel – Unpolished: 5B
Aluminum – Untreated: 5B
Brass – Untreated: 5B
ABS – Untreated: 5B
Polycarbonate – Untreated: 0B
Nylon – Untreated: 5B
HDPE – Untreated: 0B

Certified to ISO-9001:2015

Disclaimer:

The information and data contained herein are believed to be correct. However, we do not warrant either expressly or by implication the accuracy thereof.