GENERAL INFORMATION

Special Features: NMP-Free (NF)
Application Types – Industrial Coatings: Interior, Exterior, Synthetic Leather, Flooring, Wood, Concrete, Paint, Metal, Graphic Arts, OPV, Paper, Textiles, Plastics – Flexible, Plastics – Rigid

TYPICAL SPECIFICATIONS

Total Solids %: 34 – 36
pH: 8.5 – 10.5
Viscosity @ 25⁰ C: 10-500 cps
VOC (Grams/Liter): 111-113
VOC (% of total weight): 10.5-11.5
Specific Gravity: 1.03-1.06
Appearance: Semi-translucent
Gloss (60): 80-100
Freeze/Thaw Cycles (D-2243): 0
Shelf Life: Maximum 12 months
Harmonize Tariff Number: 3909.50.6000

TYPICAL FILM PROPERTIES

Film Appearance after Curing: Clear
Tensile (D-882): 6200 psi
Tensile at 100% Elongation: 2450 psi
Elongation (D-882): 420%
Cold Crank (ISO 17233): <-30°C
Softening Point: 210°C
Pencil Hardness (D-3363): 2B
Sward Hardness (D-2134): 32
UV Resistance (D-4587): No Damage (1000 hours at 340 nm)
Impact Resistance (D-2794): No Damage at 160 psi (Direct or Reverse)
Tabor Abrasion (D-4060): 11mg loss (CS-10, 1000g, 1000 cycles)
Mandrel Bend (D-522): Pass 1/8, 1/4, 3/8, 1/2, 5/8, 3/4, 1
Dry Time (D-5895): 60 minutes
Hydrolysis Resistance (200 hours, 70ºC, 95% RH): Retained 80% of Tensile Properties

CHEMICAL RESISTANCE TESTING (D-1308)

note: 5= no damage, films dried for 15 minutes at 80ºC, then equalized at room temp for 7 days.
Water: 5
Acetic Acid: 5
Ammonia: 5
Methyl Ethyl Ketone: 5
2-Propanol: 5
Toluene: 5
Gasoline: 5

VARIOUS SUBSTRATE CROSS CUT ADHESION (D-3359)

Cold Roll Steel – Unpolished: 5B
Aluminum – Untreated: 5B
Brass – Untreated: 5B
ABS – Untreated: 0B
Polycarbonate – Untreated: 0B
Nylon – Untreated: 0B
HDPE – Untreated: 0B

Certified to ISO-9001:2015

Disclaimer:

The information and data contained herein are believed to be correct. However, we do not warrant either expressly or by implication the accuracy thereof.